How to replace the door of the fireplace | China Marble 

How to replace the door of the fireplace

Moloney fireplace first to tell you about how to determine the door seal rope need to be replaced, then talk about how to remove the old seal rope, and finally how to install a new seal rope.

Replacement of the door seal rope is every wood burning fireplace users should be proficient in the work. In general, the door seal rope every two or three years need to be replaced once, if you use the fireplace frequency is longer, seal rope replacement should be more frequent. Moloney fireplace first to tell you about how to determine the door seal rope need to be replaced, then talk about how to remove the old seal rope, and finally how to install a new seal rope.

How to replace the door of the fireplace?

1, the test door sealing

Make sure the fireplace is completely cooled. Take a note and put it in the middle of the door and door frame. Close the door and pull the paper. If the note is free to show that the sealing rope needs to be replaced. If the sealing rope is well sealed, it should be clearly felt when you pull the note. Repeat the above test at the rest of the door to check the overall sealing of the door.

You may have noticed that the firewood burns much faster than before, or that the air intake is not as sensitive as it was before the furnace sucks too much air through the aging seal. When you change the new seal rope, you will find that the consumption rate of firewood is significantly reduced and the inlet control becomes flexible and efficient. Be sure to purchase the original sealing rope from the regular channel to ensure proper diameter, texture and fire resistance, which is closely related to safety.

2, remove the old seal rope

With some simple tools you can easily remove the old seal rope. You need to use pliers, steel brushes, flat screwdrivers, soft cloth and scissors. With the pliers to pull the old seal rope. Clean the groove with a steel brush. If there is stubborn glue or seal rope residue, use a flat screwdriver strong clear. And then use the steel brush, and finally with a soft cloth thoroughly cleaned to ensure that the groove is smooth, clean and dry.

3, prepare a new sealing rope

Place the new sealed rope in the groove (now do not add glue) to determine the desired length. Be careful not to elongate the sealing rope, but to keep it in a natural state of tightening. Be careful not to leave gaps at the corners and joints. After determining the length of the cut with a scissors seal rope, cut to be neat.

How to replace the door of the fireplace?

4, the use of high temperature resistant glue

The high temperature glue squeeze in the groove, in the corner and seal the end of the rope to connect the place to add some glue, in other places can be less.

5, install a new sealing rope

From the middle of the lower door of the door to start laying the sealing rope, the sealing rope tightly pressed into the groove. Be careful not to elongate the sealing rope, to ensure that the two ends of the sealing rope to properly contact each other, leaving no gaps in the middle.

With a soft cloth to wipe off the excess high temperature plastic, a newspaper clip between the door and the door frame, close the door, wait 24 hours later to open the door. The newspaper in the middle can prevent the remaining glue from gluing the sealing rope to the door frame. The closed door can keep the pressure on the sealing rope to achieve the best bonding effect.

How to replace the door of the fireplace?

6, test the sealing effect of the new sealing rope

Repeat step 1 to test the sealing effect of the sealing rope. If the paper is still free to move, it is possible that the sealing rope is too thin or the door is deformed. If it is the latter, you need to contact the dealer to change the door. Please note that the reduction in the sealing of the door may cause the firewood to burn too violently, to burn excessively, to damage the fireplace / stove.


Copyright 2009 Beijing Stars Stone Co., Ltd. All Rights Reserved.京ICP备2024042609号-5

Contact Us

Name*
E-Mail*
Country*
Phone
Your Question*
Thank you,
Your message has been sent.
//点击分享
0.0320s